DD-M Servo-Electric Press Brake
A 100% electric press brake: dual servo motors drive the ram through belts and pulleys. No hydraulic oil, faster cycles and lower energy use.
Key specs
- Capacity
- 40 – 200 t
- Bending length
- 1,530 – 4,080 mm
- Stroke
- 300 mm
- Energy
- Up to 50% less than hydraulic (manufacturer data)
- Cycle time
- Up to 30% faster (manufacturer data)
Why this machine
No oil, less maintenance
No pump, valves, seals, filters or cylinders to service, and nothing to leak.
Closed O-frame
The rigid O-frame does not open under load, for better tool alignment and more consistent angles.
Quiet and fast
High acceleration and quick direction changes; the machine runs quietly.
Standard equipment
- ESA S675 W control with offline programming
- Servo X-R back gauge (ball screw, ±0.03 mm)
- European-type punch and die holders
- Electrical cabinet A/C
Options
- Delem DA-66T or DA-69T 2D/3D controls
- 4- to 6-axis back gauges (incl. ATF type)
- CNC crowning
- Linear-guided front support arms
- Laser safety system or light curtain
- Wila, Wilson or American-style tool clamping
- Sheet followers
Technical data
| Model | Bending length (mm) | Capacity (t) | Stroke (mm) | Approach (mm/s) | Bending (mm/s) | Return (mm/s) | Motor (kW) | Weight (kg) |
|---|---|---|---|---|---|---|---|---|
| DD-M 4015 | 1,530 | 40 | 300 | 170 | 20 | 170 | 11 | 4,600 |
| DD-M 5020 | 2,040 | 50 | 300 | 150 | 20 | 150 | 11 | 4,850 |
| DD-M 6525 | 2,550 | 65 | 300 | 130 | 20 | 130 | 11 | 5,500 |
| DD-M 8025 | 2,550 | 80 | 300 | 90 | 20 | 90 | 11 | 6,100 |
| DD-M 10030 | 3,050 | 100 | 300 | 75 | 20 | 75 | 11 | 6,500 |
| DD-M 13030 | 3,050 | 130 | 300 | 85 | 20 | 85 | 12.5 | 8,500 |
| DD-M 15030 | 3,050 | 150 | 300 | 100 | 20 | 100 | 22 | 9,500 |
| DD-M 17535 | 3,570 | 175 | 300 | 90 | 20 | 90 | 22 | 11,500 |
| DD-M 20040 | 4,080 | 200 | 300 | 75 | 20 | 75 | 22 | 13,000 |
Values from the manufacturer. Specifications may change without notice — ask us for the exact configuration you need.
Installed and supported by B-Mak
Every machine includes installation, commissioning and operator training. After that, we stay: maintenance, repairs and parts.
Have a project or a machine that needs attention?
Tell us what you need. We usually call back within 24 hours.