Automatic Hydraulic Dishing Press
A hydraulic dishing press with an automatic manipulator for tank and pressure-vessel heads — the manipulator turns the plate between strokes, synchronized with the press.
Key specs
- Press force
- 150 – 600 t
- Between columns
- 3,500 or 5,000 mm
- Stroke
- 500 – 1,000 mm
- Control
- Numerical control, proportional valves
- Handling
- Automatic manipulator
Why this machine
Synchronized manipulator
The numerical control runs the press and the manipulator together for accuracy and output.
Rigid frame
Upper and lower beams joined by struts and hydraulic tie rods keep frame deflection to a minimum.
Controlled pressing
Proportional valves pick the right speed for each step; a pre-release unit limits hydraulic shock.
Standard equipment
- Automatic plate manipulator
- Numerical control system
- Proportional pressure control
- Pressure pre-release unit
- Emergency stop
Options
- Dies for torispherical, elliptical and flat heads
- Pressing from the edge or from the centre
Technical data
| Model | Press force (t) | Distance between columns (mm) | Max. pressure (bar) | Stroke (mm) | Motor (kW) | Weight (kg) |
|---|---|---|---|---|---|---|
| DP BM 3012 | 150 | 3,500 | 230 | 500 | 30+5.5 | 13,500 |
| DP BM 5012 | 150 | 5,000 | 230 | 500 | 30+5.5 | 15,000 |
| DP BM 3016 | 200 | 3,500 | 250 | 600 | 37+5.5 | 15,500 |
| DP BM 5016 | 200 | 5,000 | 250 | 600 | 37+5.5 | 17,000 |
| DP BM 3020 | 250 | 3,500 | 230 | 600 | 37+7.5 | 19,000 |
| DP BM 5020 | 250 | 5,000 | 230 | 600 | 37+7.5 | 23,000 |
| DP BM 3025 | 300 | 3,500 | 220 | 800 | 45+7.5 | 21,000 |
| DP BM 5025 | 300 | 5,000 | 220 | 800 | 45+7.5 | 25,000 |
| DP BM 3030 | 400 | 3,500 | 250 | 800 | 55+7.5 | 26,000 |
| DP BM 5030 | 400 | 5,000 | 250 | 800 | 55+7.5 | 32,000 |
| DP BM 5040 | 500 | 5,000 | 220 | 1,000 | 55+11 | 38,000 |
| DP BM 5050 | 600 | 5,000 | 250 | 1,000 | 75+15 | 44,000 |
Values from the manufacturer. Specifications may change without notice — ask us for the exact configuration you need.
Installed and supported by B-Mak
Every machine includes installation, commissioning and operator training. After that, we stay: maintenance, repairs and parts.
Have a project or a machine that needs attention?
Tell us what you need. We usually call back within 24 hours.